EN

CO2 Laser Cutter
  • JW1390-M7-S

  • JW1390-M7-S

  • JW1390-M7-S

JW1390-M7-S

CO2 Laser cutting machine

1390M7-S with up and down table is a professional co2 laser engraving and cutting machine. The working area is 1300*900mm, Z axis height can be 300mm. Engraving speed is fast. Up to 1200mm/sec. The structure is very strong, which makes it more steady. This machine equipped with a honeycomb and a blade worktable and with a water chiller, makes it possible to install a 100W or even 300W laser tube. The front and back material pass-through door makes it possible to cut long materials.

Features

CO2 lasers have very high conversion efficiency and are widely used in light industry. It is clean, safe and pollution-free. 

01

The front and back material pass-through door makes it possible to cut long materials.

02

Whole machine is equipped with leakage overload protector

03

Independent laser power supply to avoid high voltage interference

04

Filament optical frame, the light path is more stable

Parameters

DescriptionJW1390-S
Working Area
1300*900 mm
Working VoltageAC 220V±10%,50HZ
Control SystemRuida controller
DriverLeadshine stepper motor, Servo motor
Machine tableBlade table, Honeycomb table (Optional)
Laser typeGlass Inner Cavity Sealed CO2 Laser Wavelength 10.6μm
Energy regulationPure circulating water cooling
energy regulation0-100% stepless control, 0-100% adjustable within the software
Minimum Formed Words≤±0.05mm
Engraving speed0 -1200mm/s
Cutting speed0 - 600mm/s
Minimum Formed WordsEnglish word 1mm
Working environmentTemperature: 0-45C, Humidity 5-95%(No Condensate Water)
Total power<3KW
Graphic format supportedBMP, JGP, PNG, DXF, etc.


Cutting Capacity



PowerAcrylicWoodMDF
  80 W10mm10mm5mm
100 W15mm13mm7mm
150 W20mm18mm10mm
180 W22mm20mm12mm
300 W30mm30mm18mm



Floor Plan

JW1390-M7-F



Machine Details

Ruida Controller

Ruida Controller

01 It can run completely offline, supports U disk to read and write processing files, and can modify file processing attributes; 02 Dynamic display of processing trajectory, coordinate points, progress bar, etc. 03 Panel direct operation automatic focus, support contact and non-contact; 04 Cooperate with the expansion interface of external equipment to facilitate customization requirements.

Lens holder

Lens holder

We use the thin wire optical frame made of pure copper, which is not easy to change light, makes the optical path more stable, can fix the mirror wire, and has the effect of cooling the lens quickly.

X axis

X axis

X aixs belt transmission, and we use synchronous gear made of pure copper, which is wear-resistant and corrosion-resistant.

The installation of motors

The installation of motors

Our company's motor is installed vertically. There is only one resonance point can reduce the vibration and improve cutting effect.

Electric lifting table

Electric lifting table

The distance from the laser head to the table on a common table is 30mm, and it can reach 260mm with the electric lifting table

Industry Applications

  • Acrylic LOGO cutting

    Acrylic LOGO cutting

    3D MDF eagle

    3D MDF eagle

    Wood mickey mouse

    Wood mickey mouse

成为我们的经销商

联系我们

nancy@jowuey.com

188 8836 9123

nancy@jowuey.com

山东济南章丘

联系我们

Copyright © 山东玖伍智能装备有限公司 版权所有 | 网站地图